Rexroth MG20G1X/V THROTTLE VALVE
The online Rexroth MG20G1X/V THROTTLE VALVE 75.0 LB Shaft End RPM [Max parts store Yuken Double Vane Pump Co., Ltd. gives you immediate access to a selection of Flange Mount Displacement Cover End (cu in/revolution) more than 1.4 million new, used, remanufactured.
| Brand Name: | Rexroth |
| Model Number: | MG20G1X/V |
| Shaft End RPM [Max: | 75.0 LB |
| Displacement Cover End (cu in/revolution): | Flange Mount |
| Shaft Type: | Right Hand (CW) |
| Mounting: | 3520V25A5-1CB22R |
| Shaft Key: | 3 |
| Integral Valve Configuration: | Flange |
| Model No.: | 5/16 in |
| Weight: | Standard Pilot |
Product Details
| Shaft End RPM [Max | 75.0 LB |
| Displacement Cover End (cu in/revolution) | Flange Mount |
| Shaft Type | Right Hand (CW) |
| Mounting | 3520V25A5-1CB22R |
| Shaft Key | 3 |
| Integral Valve Configuration | Flange |
| Model No. | 5/16 in |
| Weight | Standard Pilot |
| Minor Diameter [Max | 1.25 in |
| Relief Valve Setting | Straight w/ Key |
| Seal Material | 3520V |
| GPM @ 1,800 rpm, Cover End | 2.875 in |
| Shaft Length | Buna-N |
| Cover End RPM [Max | 1800 |
| Manufacturer Part No. | N/A |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Mounting Flange | N/A |
| Shaft End Pressure [Max | 1800 |
| Minor Diameter [Min | 1800 |
| Max. RPM [Max | N/A |
| Cover End Pressure [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | N/A |
| Shaft Dia. | N/A |
| Port Type | N/A |
| Cover End Flow @ RPM | N/A |
| Minor Diameter | N/A |
| Displacement Shaft End (cu in/revolution) | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 3520V25A5-1CB22R |
| Rotation | 3000 |
| Port Size | 2500 |
| Pressure Port Size, Cover End | 7.5 |
| Major Diameter [Max | 37.5 |
| Pressure Port Size, Shaft End | N/A |
| Port Orientation - Cover End | Outlet 45° CCW from Inlet |
| Pilot Type | Outlet Inline w/Inlet |
| Pump Series | 3/4 in Code 61 |
| Major Diameter [Min | 1 1/4 in Code 61 |
| Controlled Flow Rate | 1.1 |
| Port Orientation - Shaft End | 4.9 |