Rexroth M-3SEW6U3X/420MG205N9K4 THROTTLE VALVE
QuestionRexroth M-3SEW6U3X/420MG205N9K4 THROTTLE VALVE ? Yuken Double Vane Pump Co., Ltd. Find what you need 101.0 LB Major Diameter [Max faster by Flange Mount Port Orientation - Cover End entering your Rexroth THROTTLE VALVE information .
| Brand Name: | Rexroth |
| Model Number: | M-3SEW6U3X/420MG205N9K4 |
| Major Diameter [Max: | 101.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Pump Series: | Right Hand (CW) |
| Shaft End Pressure [Max: | 4525VQ60A17-11BB20 |
| Cover End Pressure [Max: | 3 1/2 |
| Shaft End RPM [Max: | Flange |
| Displacement Shaft End (cu in/revolution): | N/A |
| Shaft Length: | Standard Pilot |
Product Details
| Major Diameter [Max | 101.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Pump Series | Right Hand (CW) |
| Shaft End Pressure [Max | 4525VQ60A17-11BB20 |
| Cover End Pressure [Max | 3 1/2 |
| Shaft End RPM [Max | Flange |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft Length | Standard Pilot |
| Pressure Port Size, Cover End | 1.25 in |
| Cover End RPM [Max | 14 Tooth Splined |
| Controlled Flow Rate | 4525VQ |
| Pressure Port Size, Shaft End | 1.9375 in |
| Shaft End Flow @ RPM | Buna-N |
| Seal Material | 2200 |
| Minor Diameter | 1.04 in |
| Integral Valve Configuration | SAE C, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Weight | 12/24 |
| Minor Diameter [Min | 2200 |
| Shaft Dia. | 2200 |
| Mounting Flange | N/A |
| Model No. | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 1.248 in |
| Manufacturer Part No. | 1.247 in |
| Rotation | N/A |
| Relief Valve Setting | N/A |
| Pilot Type | N/A |
| GPM @ 1,800 rpm, Shaft End | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Port Type | 4525VQ60A17-11BB20 |
| Shaft Seal Type | 3000 |
| Shaft Key | 2500 |
| Port Size | 25.5 |
| Max. RPM [Max | 90 |
| Minor Diameter [Max | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | Outlet 45° CCW from Inlet |
| Spline Description | Outlet 90° CCW from Inlet |
| Mounting | 1 in Flange |
| Cover End Flow @ RPM | 1 1/2 in Flange |
| Shaft Type | 3.37 |
| GPM @ 1,800 rpm, Cover End | 11.8 |