Rexroth PVV4-1X/082RA15UMC Vane pump
With over 10170 full-service stores, our Rexroth PVV4-1X/082RA15UMC Vane pump inventory is extensive and Left Hand (CCW) Minor Diameter [Min our parts are priced right. within 24 hours. This helps you maximize your Yuken Double Vane Pump Co., Ltd. productivity by 45.0 LB Shaft Dia. saving time and your hard-earned dollars.
Brand Name: | Rexroth |
Model Number: | PVV4-1X/082RA15UMC |
Shaft Dia.: | 45.0 LB |
Pilot Type: | Flange Mount |
Minor Diameter [Min: | Left Hand (CCW) |
Manufacturer Part No.: | 2520VQ21A11-11BC20-LH |
Shaft Type: | 2.5 |
GPM @ 1,800 rpm, Cover End: | Flange |
Pressure Port Size, Shaft End: | N/A |
Rotation: | Standard Pilot |
Product Details
Shaft Dia. | 45.0 LB |
Pilot Type | Flange Mount |
Minor Diameter [Min | Left Hand (CCW) |
Manufacturer Part No. | 2520VQ21A11-11BC20-LH |
Shaft Type | 2.5 |
GPM @ 1,800 rpm, Cover End | Flange |
Pressure Port Size, Shaft End | N/A |
Rotation | Standard Pilot |
Controlled Flow Rate | 0.875 in |
Port Type | 13 Tooth Splined |
Port Size | 2520VQ |
Shaft Key | 1.375 in |
Mounting | Double |
Shaft End Flow @ RPM | Buna-N |
Shaft Length | 2500 |
Displacement Cover End (cu in/revolution) | 0.715 in |
Mounting Flange | SAE B, 2 Bolt |
Shaft End RPM [Max | Single Shaft Seal |
Cover End RPM [Max | 16/32 |
Major Diameter [Min | 2700 |
Minor Diameter | 2500 |
Port Orientation - Cover End | N/A |
Shaft End Pressure [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Shaft Seal Type | 0.873 in |
Cover End Flow @ RPM | 0.872 in |
GPM @ 1,800 rpm, Shaft End | N/A |
Max. RPM [Max | N/A |
Major Diameter [Max | N/A |
Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 2520VQ21A11-11BC20-LH |
Spline Description | 3000 |
Weight | 3000 |
Cover End Pressure [Max | 16.5 |
Relief Valve Setting | 31.5 |
Model No. | w/o Integral Valves |
Pump Series | Outlet 45° CW from Inlet |
Minor Diameter [Max | Outlet 90° CCW from Inlet |
Port Orientation - Shaft End | 3/4 in Flange |
Integral Valve Configuration | 1 in Flange |
Displacement Shaft End (cu in/revolution) | 4.1 |