CAT 217-2570 C-9 injector
With over 10170 full-service stores, our CAT 217-2570 C-9 injector inventory is extensive and our parts 75.0 LB Cover End Flow @ RPM are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned Yuken Double Vane Pump Co., Ltd. dollars.
| Brand Name: | CAT |
| Model Number: | 217-2570 C-9 |
| Cover End Flow @ RPM: | 75.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Port Size: | Right Hand (CW) |
| Seal Material: | 3520VQ30A11-1CC20 |
| Mounting Flange: | 3 |
| Weight: | Flange |
| Spline Description: | 5/16 in |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Cover End Flow @ RPM | 75.0 LB |
| Minor Diameter [Max | Flange Mount |
| Port Size | Right Hand (CW) |
| Seal Material | 3520VQ30A11-1CC20 |
| Mounting Flange | 3 |
| Weight | Flange |
| Spline Description | 5/16 in |
| Relief Valve Setting | Standard Pilot |
| Shaft Type | 1.25 in |
| GPM @ 1,800 rpm, Cover End | Straight w/ Key |
| Pressure Port Size, Cover End | 3520VQ |
| Rotation | 2 1/2 in |
| Port Orientation - Shaft End | Double |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Shaft Key | 2500 |
| Controlled Flow Rate | N/A |
| Pilot Type | SAE C, 2 Bolt |
| Pump Series | Single Shaft Seal |
| Major Diameter [Min | N/A |
| Port Type | 2500 |
| Model No. | 2500 |
| Shaft Seal Type | N/A |
| Major Diameter [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | N/A |
| Minor Diameter [Min | N/A |
| Displacement Shaft End (cu in/revolution) | 6 |
| Shaft End Flow @ RPM | N/A |
| Pressure Port Size, Shaft End | N/A |
| Minor Diameter | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | 3520VQ30A11-1CC20 |
| Cover End Pressure [Max | 3000 |
| Shaft Dia. | 3000 |
| Manufacturer Part No. | 16.5 |
| Shaft End RPM [Max | 45 |
| Port Orientation - Cover End | w/o Integral Valves |
| Integral Valve Configuration | Outlet 45° CW from Inlet |
| Shaft Length | Outlet Inline w/Inlet |
| Mounting | 3/4 in Flange |
| Max. RPM [Max | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 2.2 |